cupyx.scipy.signal.tf2zpk#
- cupyx.scipy.signal.tf2zpk(b, a)[source]#
Return zero, pole, gain (z, p, k) representation from a numerator, denominator representation of a linear filter.
- Parameters:
b (array_like) – Numerator polynomial coefficients.
a (array_like) – Denominator polynomial coefficients.
- Returns:
z (ndarray) – Zeros of the transfer function.
p (ndarray) – Poles of the transfer function.
k (float) – System gain.
Warning
This function may synchronize the device.
See also
Notes
If some values of b are too close to 0, they are removed. In that case, a BadCoefficients warning is emitted.
The b and a arrays are interpreted as coefficients for positive, descending powers of the transfer function variable. So the inputs \(b = [b_0, b_1, ..., b_M]\) and \(a =[a_0, a_1, ..., a_N]\) can represent an analog filter of the form:
\[H(s) = \frac {b_0 s^M + b_1 s^{(M-1)} + \cdots + b_M} {a_0 s^N + a_1 s^{(N-1)} + \cdots + a_N}\]or a discrete-time filter of the form:
\[H(z) = \frac {b_0 z^M + b_1 z^{(M-1)} + \cdots + b_M} {a_0 z^N + a_1 z^{(N-1)} + \cdots + a_N}\]This “positive powers” form is found more commonly in controls engineering. If M and N are equal (which is true for all filters generated by the bilinear transform), then this happens to be equivalent to the “negative powers” discrete-time form preferred in DSP:
\[H(z) = \frac {b_0 + b_1 z^{-1} + \cdots + b_M z^{-M}} {a_0 + a_1 z^{-1} + \cdots + a_N z^{-N}}\]Although this is true for common filters, remember that this is not true in the general case. If M and N are not equal, the discrete-time transfer function coefficients must first be converted to the “positive powers” form before finding the poles and zeros.