This is a guide for all contributions to CuPy. The development of CuPy is running on the official repository at GitHub. Anyone that wants to register an issue or to send a pull request should read through this document.
Classification of Contributions¶
There are several ways to contribute to CuPy community:
Registering an issue
Sending a pull request (PR)
Open-sourcing an external example
Writing a post about CuPy
This document mainly focuses on 1 and 2, though other contributions are also appreciated.
This section explains the development process of CuPy. Before contributing to CuPy, it is strongly recommended to understand the development cycle.
The versioning of CuPy follows PEP 440 and a part of Semantic versioning.
The version number consists of three or four parts:
X denotes the major version,
Y denotes the minor version,
Z denotes the revision number, and the optional
w denotes the prelease suffix.
While the major, minor, and revision numbers follow the rule of semantic versioning, the pre-release suffix follows PEP 440 so that the version string is much friendly with Python eco-system.
Note that a major update basically does not contain compatibility-breaking changes from the last release candidate (RC). This is not a strict rule, though; if there is a critical API bug that we have to fix for the major version, we may add breaking changes to the major version up.
As for the backward compatibility, see API Compatibility Policy.
The first one is the track of stable versions, which is a series of revision updates for the latest major version. The second one is the track of development versions, which is a series of pre-releases for the upcoming major version.
X.0.0 is the latest major version and
Z.0.0 are the succeeding major versions.
Then, the timeline of the updates is depicted by the following table.
(* These might be revision releases)
The dates shown in the left-most column are relative to the release of
In particular, each revision/minor release is made four weeks after the previous one of the same major version, and the pre-release of the upcoming major version is made at the same time.
Whether these releases are revision or minor is determined based on the contents of each update.
Note that there are only three stable releases for the versions
During the parallel development of
Z.0.0a1, the version
Y is treated as an almost-stable version and
Z is treated as a development version.
If there is a critical bug found in
X.x.x after stopping the development of version
X, we may release a hot-fix for this version at any time.
We create a milestone for each upcoming release at GitHub. The GitHub milestone is basically used for collecting the issues and PRs resolved in the release.
master branch is used to develop pre-release versions.
It means that alpha, beta, and RC updates are developed at the
This branch contains the most up-to-date source tree that includes features newly added after the latest major version.
The stable version is developed at the individual branch named as
vN where “N” reflects the version number (we call it a versioned branch).
For example, v1.0.0, v1.0.1, and v1.0.2 will be developed at the
Notes for contributors:
When you send a pull request, you basically have to send it to the
If the change can also be applied to the stable version, a core team member will apply the same change to the stable version so that the change is also included in the next revision update.
If the change is only applicable to the stable version and not to the
master branch, please send it to the versioned branch.
We basically only accept changes to the latest versioned branch (where the stable version is developed) unless the fix is critical.
If you want to make a new feature of the
master branch available in the current stable version, please send a backport PR to the stable version (the latest
See the next section for details.
Note: a change that can be applied to both branches should be sent to the
Each release of the stable version is also merged to the development version so that the change is also reflected to the next major version.
Feature Backport PRs¶
We basically do not backport any new features of the development version to the stable versions.
If you desire to include the feature to the current stable version and you can work on the backport work, we welcome such a contribution.
In such a case, you have to send a backport PR to the latest
Note that we do not accept any feature backport PRs to older versions because we are not running quality assurance workflows (e.g. CI) for older versions so that we cannot ensure that the PR is correctly ported.
There are some rules on sending a backport PR.
Start the PR title from the prefix [backport].
Clarify the original PR number in the PR description (something like “This is a backport of #XXXX”).
(optional) Write to the PR description the motivation of backporting the feature to the stable version.
Please follow these rules when you create a feature backport PR.
Note: PRs that do not include any changes/additions to APIs (e.g. bug fixes, documentation improvements) are usually backported by core dev members. It is also appreciated to make such a backport PR by any contributors, though, so that the overall development proceeds more smoothly!
Issues and Pull Requests¶
In this section, we explain how to file issues and send pull requests (PRs).
Issues and PRs are labeled by the following tags:
Bug: bug reports (issues) and bug fixes (PRs)
Enhancement: implementation improvements without breaking the interface
Feature: feature requests (issues) and their implementations (PRs)
NoCompat: disrupts backward compatibility
Test: test fixes and updates
Document: document fixes and improvements
Example: fixes and improvements on the examples
Install: fixes installation script
Contribution-Welcome: issues that we request for contribution (only issues are categorized to this)
Other: other issues and PRs
Multiple tags might be labeled to one issue/PR. Note that revision releases cannot include PRs in Feature and NoCompat categories.
How to File an Issue¶
On registering an issue, write precise explanations on how you want CuPy to be. Bug reports must include necessary and sufficient conditions to reproduce the bugs. Feature requests must include what you want to do (and why you want to do, if needed) with CuPy. You can contain your thoughts on how to realize it into the feature requests, though what part is most important for discussions.
If you have a question on usages of CuPy, it is highly recommended to send a post to CuPy’s Gitter channel, CuPy User Group or StackOverflow instead of the issue tracker. The issue tracker is not a place to share knowledge on practices. We may suggest these places and immediately close how-to question issues.
How to Send a Pull Request¶
If you can write code to fix an issue, we encourage to send a PR.
First of all, before starting to write any code, do not forget to confirm the following points.
Check the appropriate branch that you should send the PR following Git Branches. If you do not have any idea about selecting a branch, please choose the
In particular, check the branch before writing any code. The current source tree of the chosen branch is the starting point of your change.
After writing your code (including unit tests and hopefully documentations!), send a PR on GitHub. You have to write a precise explanation of what and how you fix; it is the first documentation of your code that developers read, which is a very important part of your PR.
Once you send a PR, it is automatically tested on
After the automatic test passes, core developers will start reviewing your code.
Note that this automatic PR test only includes CPU tests.
We are also running continuous integration with GPU tests for the
master branch and the versioned branch of the latest major version.
Since this service is currently running on our internal server, we do not use it for automatic PR tests to keep the server secure.
If you are planning to add a new feature or modify existing APIs, it is recommended to open an issue and discuss the design first. The design discussion needs lower cost for the core developers than code review. Following the consequences of the discussions, you can send a PR that is smoothly reviewed in a shorter time.
Even if your code is not complete, you can send a pull request as a work-in-progress PR by putting the
[WIP] prefix to the PR title.
If you write a precise explanation about the PR, core developers and other contributors can join the discussion about how to proceed the PR.
WIP PR is also useful to have discussions based on a concrete code.
Coding guidelines are updated at v5.0. Those who have contributed to older versions should read the guidelines again.
You can use
flake8 commands to check your code.
In order to avoid confusion from using different tool versions, we pin the versions of those tools. Install them with the following command (from within the top directory of CuPy repository):
$ pip install -e '.[stylecheck]'
And check your code with:
$ autopep8 path/to/your/code.py $ flake8 path/to/your/code.py
To check Cython code, use
.flake8.cython configuration file:
$ flake8 --config=.flake8.cython path/to/your/cython/code.pyx
autopep8 supports automatically correct Python code to conform to the PEP 8 style guide:
$ autopep8 --in-place path/to/your/code.py
flake8 command lets you know the part of your code not obeying our style guidelines.
Before sending a pull request, be sure to check that your code passes the
flake8 command is not perfect.
It does not check some of the style guidelines.
Here is a (not-complete) list of the rules that
flake8 cannot check.
Relative imports are prohibited. [H304]
Importing non-module symbols is prohibited.
Import statements must be organized into three parts: standard libraries, third-party libraries, and internal imports. [H306]
In addition, we restrict the usage of shortcut symbols in our code base.
They are symbols imported by packages and sub-packages of
cupy.cuda.Device is a shortcut of
It is not allowed to use such shortcuts in the ``cupy`` library implementation.
Note that you can still use them in tests and examples directories.
Once you send a pull request, your coding style is automatically checked by GitHub Actions. The reviewing process starts after the check passes.
The CuPy is designed based on NumPy’s API design. CuPy’s source code and documents contain the original NumPy ones. Please note the followings when writing the document.
In order to identify overlapping parts, it is preferable to add some remarks that this document is just copied or altered from the original one. It is also preferable to briefly explain the specification of the function in a short paragraph, and refer to the corresponding function in NumPy so that users can read the detailed document. However, it is possible to include a complete copy of the document with such a remark if users cannot summarize in such a way.
If a function in CuPy only implements a limited amount of features in the original one, users should explicitly describe only what is implemented in the document.
For changes that modify or add new Cython files, please make sure the pointer types follow these guidelines (#1913).
Pointers should be
void*if only used within Cython, or
intptr_tif exposed to the Python space.
Memory sizes should be
Memory offsets should be
We are incrementally enforcing the above rules, so some existing code may not follow the above guidelines, but please ensure all new contributions do.
Testing is one of the most important part of your code. You must write test cases and verify your implementation by following our testing guide.
Note that we are using pytest and mock package for testing, so install them before writing your code:
$ pip install pytest mock
How to Run Tests¶
In order to run unit tests at the repository root, you first have to build Cython files in place by running the following command:
$ pip install -e .
When you modify
*.pxd files, before running
pip install -e ., you must clean
*.so files once with the following command, because Cython does not automatically rebuild those files nicely:
$ git clean -fdx
Once Cython modules are built, you can run unit tests by running the following command at the repository root:
$ python -m pytest
CUDA must be installed to run unit tests.
Some GPU tests require cuDNN to run.
In order to skip unit tests that require cuDNN, specify
-m='not cudnn' option:
$ python -m pytest path/to/your/test.py -m='not cudnn'
Some GPU tests involve multiple GPUs.
If you want to run GPU tests with insufficient number of GPUs, specify the number of available GPUs to
For example, if you have only one GPU, launch
pytest by the following command to skip multi-GPU tests:
$ export CUPY_TEST_GPU_LIMIT=1 $ python -m pytest path/to/gpu/test.py
Following this naming convention, you can run all the tests by running the following command at the repository root:
$ python -m pytest
Or you can also specify a root directory to search test scripts from:
$ python -m pytest tests/cupy_tests # to just run tests of CuPy $ python -m pytest tests/install_tests # to just run tests of installation modules
If you modify the code related to existing unit tests, you must run appropriate commands.
Test File and Directory Naming Conventions¶
Tests are put into the tests/cupy_tests directory. In order to enable test runner to find test scripts correctly, we are using special naming convention for the test subdirectories and the test scripts.
The name of each subdirectory of
testsmust end with the
The name of each test script must start with the
When we write a test for a module, we use the appropriate path and file name for the test script whose correspondence to the tested module is clear.
For example, if you want to write a test for a module
cupy.x.y.z, the test script must be located at
How to Write Tests¶
There are many examples of unit tests under the tests directory, so reading some of them is a good and recommended way to learn how to write tests for CuPy.
They simply use the
unittest package of the standard library, while some tests are using utilities from
In addition to the Coding Guidelines mentioned above, the following rules are applied to the test code:
All test classes must inherit from
unittestfeatures to write tests, except for the following cases:
assertstatement instead of
self.assert*methods (e.g., write
assert x == 1instead of
with pytest.raises(...):instead of
We are incrementally applying the above style.
Some existing tests may be using the old style (
self.assertRaises, etc.), but all newly written tests should follow the above style.
Even if your patch includes GPU-related code, your tests should not fail without GPU capability.
Test functions that require CUDA must be tagged by the
import unittest from cupy.testing import attr class TestMyFunc(unittest.TestCase): ... @attr.gpu def test_my_gpu_func(self): ...
The functions tagged by the
gpu decorator are skipped if
CUPY_TEST_GPU_LIMIT=0 environment variable is set.
We also have the
cupy.testing.attr.cudnn decorator to let
pytest know that the test depends on cuDNN.
The test functions decorated by
cudnn are skipped if
-m='not cudnn' is given.
The test functions decorated by
gpu must not depend on multiple GPUs.
In order to write tests for multiple GPUs, use
cupy.testing.attr.multi_gpu() decorators instead:
import unittest from cupy.testing import attr class TestMyFunc(unittest.TestCase): ... @attr.multi_gpu(2) # specify the number of required GPUs here def test_my_two_gpu_func(self): ...
If your test requires too much time, add
The test functions decorated by
slow are skipped if
-m='not slow' is given:
import unittest from cupy.testing import attr class TestMyFunc(unittest.TestCase): ... @attr.slow def test_my_slow_func(self): ...
If you want to specify more than two attributes, use
and operator like
-m='not cudnn and not slow'.
See detail in the document of pytest.
Once you send a pull request, Travis-CI automatically checks if your code meets our coding guidelines described above. Since Travis-CI does not support CUDA, we cannot run unit tests automatically. The reviewing process starts after the automatic check passes. Note that reviewers will test your code without the option to check CUDA-related code.
Some of numerically unstable tests might cause errors irrelevant to your changes. In such a case, we ignore the failures and go on to the review process, so do not worry about it!
When adding a new feature to the framework, you also need to document it in the reference.
If you are unsure about how to fix the documentation, you can submit a pull request without doing so. Reviewers will help you fix the documentation appropriately.
To build the documentation, you need to install Sphinx:
$ pip install -r docs/requirements.txt
Then you can build the documentation in HTML format locally:
$ cd docs $ make html
HTML files are generated under
index.html with the browser and see if it is rendered as expected.
Docstrings (documentation comments in the source code) are collected from the installed CuPy module. If you modified docstrings, make sure to install the module (e.g., using pip install -e .) before building the documentation.
Tips for Developers¶
Here are some tips for developers hacking CuPy source code.
Install as Editable¶
During the development we recommend using
-e option to install as editable mode:
$ pip install -e .
Please note that even with
-e, you will have to rerun
pip install -e . to regenerate C++ sources using Cython if you modified Cython source files (e.g.,
NVCC environment variable can be specified at the build time to use the custom command instead of
You can speed up the rebuild using ccache (v3.4 or later) by:
$ export NVCC='ccache nvcc'
CUPY_NVCC_GENERATE_CODE environment variable to reduce the build time by limiting the target CUDA architectures.
For example, if you only run your CuPy build with NVIDIA P100 and V100, you can use:
$ export CUPY_NVCC_GENERATE_CODE=arch=compute_60,code=sm_60;arch=compute_70,code=sm_70
See Environment variables for the description.