User-Defined Kernels#

CuPy provides easy ways to define three types of CUDA kernels: elementwise kernels, reduction kernels and raw kernels. In this documentation, we describe how to define and call each kernels.

Basics of elementwise kernels#

An elementwise kernel can be defined by the ElementwiseKernel class. The instance of this class defines a CUDA kernel which can be invoked by the __call__ method of this instance.

A definition of an elementwise kernel consists of four parts: an input argument list, an output argument list, a loop body code, and the kernel name. For example, a kernel that computes a squared difference \(f(x, y) = (x - y)^2\) is defined as follows:

>>> squared_diff = cp.ElementwiseKernel(
...    'float32 x, float32 y',
...    'float32 z',
...    'z = (x - y) * (x - y)',
...    'squared_diff')

The argument lists consist of comma-separated argument definitions. Each argument definition consists of a type specifier and an argument name. Names of NumPy data types can be used as type specifiers.


n, i, and names starting with an underscore _ are reserved for the internal use.

The above kernel can be called on either scalars or arrays with broadcasting:

>>> x = cp.arange(10, dtype=np.float32).reshape(2, 5)
>>> y = cp.arange(5, dtype=np.float32)
>>> squared_diff(x, y)
array([[ 0.,  0.,  0.,  0.,  0.],
       [25., 25., 25., 25., 25.]], dtype=float32)
>>> squared_diff(x, 5)
array([[25., 16.,  9.,  4.,  1.],
       [ 0.,  1.,  4.,  9., 16.]], dtype=float32)

Output arguments can be explicitly specified (next to the input arguments):

>>> z = cp.empty((2, 5), dtype=np.float32)
>>> squared_diff(x, y, z)
array([[ 0.,  0.,  0.,  0.,  0.],
       [25., 25., 25., 25., 25.]], dtype=float32)

Type-generic kernels#

If a type specifier is one character, then it is treated as a type placeholder. It can be used to define a type-generic kernels. For example, the above squared_diff kernel can be made type-generic as follows:

>>> squared_diff_generic = cp.ElementwiseKernel(
...     'T x, T y',
...     'T z',
...     'z = (x - y) * (x - y)',
...     'squared_diff_generic')

Type placeholders of a same character in the kernel definition indicate the same type. The actual type of these placeholders is determined by the actual argument type. The ElementwiseKernel class first checks the output arguments and then the input arguments to determine the actual type. If no output arguments are given on the kernel invocation, then only the input arguments are used to determine the type.

The type placeholder can be used in the loop body code:

>>> squared_diff_generic = cp.ElementwiseKernel(
...     'T x, T y',
...     'T z',
...     '''
...         T diff = x - y;
...         z = diff * diff;
...     ''',
...     'squared_diff_generic')

More than one type placeholder can be used in a kernel definition. For example, the above kernel can be further made generic over multiple arguments:

>>> squared_diff_super_generic = cp.ElementwiseKernel(
...     'X x, Y y',
...     'Z z',
...     'z = (x - y) * (x - y)',
...     'squared_diff_super_generic')

Note that this kernel requires the output argument explicitly specified, because the type Z cannot be automatically determined from the input arguments.

Raw argument specifiers#

The ElementwiseKernel class does the indexing with broadcasting automatically, which is useful to define most elementwise computations. On the other hand, we sometimes want to write a kernel with manual indexing for some arguments. We can tell the ElementwiseKernel class to use manual indexing by adding the raw keyword preceding the type specifier.

We can use the special variable i and method _ind.size() for the manual indexing. i indicates the index within the loop. _ind.size() indicates total number of elements to apply the elementwise operation. Note that it represents the size after broadcast operation.

For example, a kernel that adds two vectors with reversing one of them can be written as follows:

>>> add_reverse = cp.ElementwiseKernel(
...     'T x, raw T y', 'T z',
...     'z = x + y[_ind.size() - i - 1]',
...     'add_reverse')

(Note that this is an artificial example and you can write such operation just by z = x + y[::-1] without defining a new kernel). A raw argument can be used like an array. The indexing operator y[_ind.size() - i - 1] involves an indexing computation on y, so y can be arbitrarily shaped and strode.

Note that raw arguments are not involved in the broadcasting. If you want to mark all arguments as raw, you must specify the size argument on invocation, which defines the value of _ind.size().

Texture memory#

Texture objects (TextureObject) can be passed to ElementwiseKernel with their type marked by a unique type placeholder distinct from any other types used in the same kernel, as its actual datatype is determined when populating the texture memory. The texture coordinates can be computed in the kernel by the per-thread loop index i.

Reduction kernels#

Reduction kernels can be defined by the ReductionKernel class. We can use it by defining four parts of the kernel code:

  1. Identity value: This value is used for the initial value of reduction.

  2. Mapping expression: It is used for the pre-processing of each element to be reduced.

  3. Reduction expression: It is an operator to reduce the multiple mapped values. The special variables a and b are used for its operands.

  4. Post mapping expression: It is used to transform the resulting reduced values. The special variable a is used as its input. Output should be written to the output parameter.

ReductionKernel class automatically inserts other code fragments that are required for an efficient and flexible reduction implementation.

For example, L2 norm along specified axes can be written as follows:

>>> l2norm_kernel = cp.ReductionKernel(
...     'T x',  # input params
...     'T y',  # output params
...     'x * x',  # map
...     'a + b',  # reduce
...     'y = sqrt(a)',  # post-reduction map
...     '0',  # identity value
...     'l2norm'  # kernel name
... )
>>> x = cp.arange(10, dtype=np.float32).reshape(2, 5)
>>> l2norm_kernel(x, axis=1)
array([ 5.477226 , 15.9687195], dtype=float32)


raw specifier is restricted for usages that the axes to be reduced are put at the head of the shape. It means, if you want to use raw specifier for at least one argument, the axis argument must be 0 or a contiguous increasing sequence of integers starting from 0, like (0, 1), (0, 1, 2), etc.


Texture memory is not yet supported in ReductionKernel.

Raw kernels#

Raw kernels can be defined by the RawKernel class. By using raw kernels, you can define kernels from raw CUDA source.

RawKernel object allows you to call the kernel with CUDA’s cuLaunchKernel interface. In other words, you have control over grid size, block size, shared memory size and stream.

>>> add_kernel = cp.RawKernel(r'''
... extern "C" __global__
... void my_add(const float* x1, const float* x2, float* y) {
...     int tid = blockDim.x * blockIdx.x + threadIdx.x;
...     y[tid] = x1[tid] + x2[tid];
... }
... ''', 'my_add')
>>> x1 = cp.arange(25, dtype=cp.float32).reshape(5, 5)
>>> x2 = cp.arange(25, dtype=cp.float32).reshape(5, 5)
>>> y = cp.zeros((5, 5), dtype=cp.float32)
>>> add_kernel((5,), (5,), (x1, x2, y))  # grid, block and arguments
>>> y
array([[ 0.,  2.,  4.,  6.,  8.],
       [10., 12., 14., 16., 18.],
       [20., 22., 24., 26., 28.],
       [30., 32., 34., 36., 38.],
       [40., 42., 44., 46., 48.]], dtype=float32)

Raw kernels operating on complex-valued arrays can be created as well:

>>> complex_kernel = cp.RawKernel(r'''
... #include <cupy/complex.cuh>
... extern "C" __global__
... void my_func(const complex<float>* x1, const complex<float>* x2,
...              complex<float>* y, float a) {
...     int tid = blockDim.x * blockIdx.x + threadIdx.x;
...     y[tid] = x1[tid] + a * x2[tid];
... }
... ''', 'my_func')
>>> x1 = cupy.arange(25, dtype=cupy.complex64).reshape(5, 5)
>>> x2 = 1j*cupy.arange(25, dtype=cupy.complex64).reshape(5, 5)
>>> y = cupy.zeros((5, 5), dtype=cupy.complex64)
>>> complex_kernel((5,), (5,), (x1, x2, y, cupy.float32(2.0)))  # grid, block and arguments
>>> y
array([[ 0. +0.j,  1. +2.j,  2. +4.j,  3. +6.j,  4. +8.j],
       [ 5.+10.j,  6.+12.j,  7.+14.j,  8.+16.j,  9.+18.j],
       [10.+20.j, 11.+22.j, 12.+24.j, 13.+26.j, 14.+28.j],
       [15.+30.j, 16.+32.j, 17.+34.j, 18.+36.j, 19.+38.j],
       [20.+40.j, 21.+42.j, 22.+44.j, 23.+46.j, 24.+48.j]],

Note that while we encourage the usage of complex<T> types for complex numbers (available by including <cupy/complex.cuh> as shown above), for CUDA codes already written using functions from cuComplex.h there is no need to make the conversion yourself: just set the option translate_cucomplex=True when creating a RawKernel instance.

The CUDA kernel attributes can be retrieved by either accessing the attributes dictionary, or by accessing the RawKernel object’s attributes directly; the latter can also be used to set certain attributes:

>>> add_kernel = cp.RawKernel(r'''
... extern "C" __global__
... void my_add(const float* x1, const float* x2, float* y) {
...     int tid = blockDim.x * blockIdx.x + threadIdx.x;
...     y[tid] = x1[tid] + x2[tid];
... }
... ''', 'my_add')
>>> add_kernel.attributes  
{'max_threads_per_block': 1024, 'shared_size_bytes': 0, 'const_size_bytes': 0, 'local_size_bytes': 0, 'num_regs': 10, 'ptx_version': 70, 'binary_version': 70, 'cache_mode_ca': 0, 'max_dynamic_shared_size_bytes': 49152, 'preferred_shared_memory_carveout': -1}
>>> add_kernel.max_dynamic_shared_size_bytes  
>>> add_kernel.max_dynamic_shared_size_bytes = 50000  # set a new value for the attribute  
>>> add_kernel.max_dynamic_shared_size_bytes  

Dynamical parallelism is supported by RawKernel. You just need to provide the linking flag (such as -dc) to RawKernel’s options argument. The static CUDA device runtime library (cudadevrt) is automatically discovered by CuPy. For further detail, see CUDA Toolkit’s documentation.

Accessing texture (surface) memory in RawKernel is supported via CUDA Runtime’s Texture (Surface) Object API, see the documentation for TextureObject (SurfaceObject) as well as CUDA C Programming Guide. For using the Texture Reference API, which is marked as deprecated as of CUDA Toolkit 10.1, see the introduction to RawModule below.

If your kernel relies on the C++ std library headers such as <type_traits>, it is likely you will encounter compilation errors. In this case, try enabling CuPy’s Jitify support by setting jitify=True when creating the RawKernel instance. It provides basic C++ std support to remedy common errors.


The kernel does not have return values. You need to pass both input arrays and output arrays as arguments.


When using printf() in your CUDA kernel, you may need to synchronize the stream to see the output. You can use cupy.cuda.Stream.null.synchronize() if you are using the default stream.


In all of the examples above, we declare the kernels in an extern "C" block, indicating that the C linkage is used. This is to ensure the kernel names are not mangled so that they can be retrived by name.

Kernel arguments#

Python primitive types and NumPy scalars are passed to the kernel by value. Array arguments (pointer arguments) have to be passed as CuPy ndarrays. No validation is performed by CuPy for arguments passed to the kernel, including types and number of arguments.

Especially note that when passing a CuPy ndarray, its dtype should match with the type of the argument declared in the function signature of the CUDA source code (unless you are casting arrays intentionally).

As an example, cupy.float32 and cupy.uint64 arrays must be passed to the argument typed as float* and unsigned long long*, respectively. CuPy does not directly support arrays of non-primitive types such as float3, but nothing prevents you from casting a float* or void* to a float3* in a kernel.

Python primitive types, int, float, complex and bool map to long long, double, cuDoubleComplex and bool, respectively.

NumPy scalars (numpy.generic) and NumPy arrays (numpy.ndarray) of size one are passed to the kernel by value. This means that you can pass by value any base NumPy types such as numpy.int8 or numpy.float64, provided the kernel arguments match in size. You can refer to this table to match CuPy/NumPy dtype and CUDA types:

CuPy/NumPy type

Corresponding kernel types

itemsize (bytes)





char, signed char



short, signed short



int, signed int



long long, signed long long



unsigned char



unsigned short



unsigned int



unsigned long long












float2, cuFloatComplex, complex<float>



double2, cuDoubleComplex, complex<double>


The CUDA standard guarantees that the size of fundamental types on the host and device always match. The itemsize of size_t, ptrdiff_t, intptr_t, uintptr_t, long, signed long and unsigned long are however platform dependent. To pass any CUDA vector builtins such as float3 or any other user defined structure as kernel arguments (provided it matches the device-side kernel parameter type), see Custom user types below.

Custom user types#

It is possible to use custom types (composite types such as structures and structures of structures) as kernel arguments by defining a custom NumPy dtype. When doing this, it is your responsibility to match host and device structure memory layout. The CUDA standard guarantees that the size of fundamental types on the host and device always match. It may however impose device alignment requirements on composite types. This means that for composite types the struct member offsets may be different from what you might expect.

When a kernel argument is passed by value, the CUDA driver will copy exactly sizeof(param_type) bytes starting from the beginning of the NumPy object data pointer, where param_type is the parameter type in your kernel. You have to match param_type’s memory layout (ex: size, alignment and struct padding/packing) by defining a corresponding NumPy dtype.

For builtin CUDA vector types such as int2 and double4 and other packed structures with named members you can directly define such NumPy dtypes as the following:

>>> import numpy as np
>>> names = ['x', 'y', 'z']
>>> types = [np.float32]*3
>>> float3 = np.dtype({'names': names, 'formats': types})
>>> arg = np.random.rand(3).astype(np.float32).view(float3)
>>> print(arg)  
[(0.9940819, 0.62873816, 0.8953669)]
>>> arg['x'] = 42.0
>>> print(arg)  
[(42., 0.62873816, 0.8953669)]

Here arg can be used directly as a kernel argument. When there is no need to name fields you may prefer this syntax to define packed structures such as vectors or matrices:

>>> import numpy as np
>>> float5x5 = np.dtype({'names': ['dummy'], 'formats': [(np.float32,(5,5))]})
>>> arg = np.random.rand(25).astype(np.float32).view(float5x5)
>>> print(arg.itemsize)

Here arg represents a 100-byte scalar (i.e. a NumPy array of size 1) that can be passed by value to any kernel. Kernel parameters are passed by value in a dedicated 4kB memory bank which has its own cache with broadcast. Upper bound for total kernel parameters size is thus 4kB (see this link). It may be important to note that this dedicated memory bank is not shared with the device __constant__ memory space.

For now, CuPy offers no helper routines to create user defined composite types. Such composite types can however be built recursively using NumPy dtype offsets and itemsize capabilities, see cupy/examples/custum_struct for examples of advanced usage.


You cannot directly pass static arrays as kernel arguments with the type arg[N] syntax where N is a compile time constant. The signature of __global__ void kernel(float arg[5]) is seen as __global__ void kernel(float* arg) by the compiler. If you want to pass five floats to the kernel by value you need to define a custom structure struct float5 { float val[5]; }; and modify the kernel signature to __global__ void kernel(float5 arg).

Raw modules#

For dealing a large raw CUDA source or loading an existing CUDA binary, the RawModule class can be more handy. It can be initialized either by a CUDA source code, or by a path to the CUDA binary. It accepts most of the arguments as in RawKernel. The needed kernels can then be retrieved by calling the get_function() method, which returns a RawKernel instance that can be invoked as discussed above.

>>> loaded_from_source = r'''
... extern "C"{
... __global__ void test_sum(const float* x1, const float* x2, float* y, \
...                          unsigned int N)
... {
...     unsigned int tid = blockDim.x * blockIdx.x + threadIdx.x;
...     if (tid < N)
...     {
...         y[tid] = x1[tid] + x2[tid];
...     }
... }
... __global__ void test_multiply(const float* x1, const float* x2, float* y, \
...                               unsigned int N)
... {
...     unsigned int tid = blockDim.x * blockIdx.x + threadIdx.x;
...     if (tid < N)
...     {
...         y[tid] = x1[tid] * x2[tid];
...     }
... }
... }'''
>>> module = cp.RawModule(code=loaded_from_source)
>>> ker_sum = module.get_function('test_sum')
>>> ker_times = module.get_function('test_multiply')
>>> N = 10
>>> x1 = cp.arange(N**2, dtype=cp.float32).reshape(N, N)
>>> x2 = cp.ones((N, N), dtype=cp.float32)
>>> y = cp.zeros((N, N), dtype=cp.float32)
>>> ker_sum((N,), (N,), (x1, x2, y, N**2))   # y = x1 + x2
>>> assert cp.allclose(y, x1 + x2)
>>> ker_times((N,), (N,), (x1, x2, y, N**2)) # y = x1 * x2
>>> assert cp.allclose(y, x1 * x2)

The instruction above for using complex numbers in RawKernel also applies to RawModule.

For CUDA kernels that need to access global symbols, such as constant memory, the get_global() method can be used, see its documentation for further detail.

Note that the deprecated API cupy.RawModule.get_texref() has been removed since CuPy vX.X due to the removal of texture reference support from CUDA.

To support C++ template kernels, RawModule additionally provide a name_expressions argument. A list of template specializations should be provided, so that the corresponding kernels can be generated and retrieved by type:

>>> code = r'''
... template<typename T>
... __global__ void fx3(T* arr, int N) {
...     unsigned int tid = blockIdx.x * blockDim.x + threadIdx.x;
...     if (tid < N) {
...         arr[tid] = arr[tid] * 3;
...     }
... }
... '''
>>> name_exp = ['fx3<float>', 'fx3<double>']
>>> mod = cp.RawModule(code=code, options=('-std=c++11',),
...     name_expressions=name_exp)
>>> ker_float = mod.get_function(name_exp[0])  # compilation happens here
>>> N=10
>>> a = cp.arange(N, dtype=cp.float32)
>>> ker_float((1,), (N,), (a, N))
>>> a
array([ 0.,  3.,  6.,  9., 12., 15., 18., 21., 24., 27.], dtype=float32)
>>> ker_double = mod.get_function(name_exp[1])
>>> a = cp.arange(N, dtype=cp.float64)
>>> ker_double((1,), (N,), (a, N))
>>> a
array([ 0.,  3.,  6.,  9., 12., 15., 18., 21., 24., 27.])


The name expressions used to both initialize a RawModule instance and retrieve the kernels are the original (un-mangled) kernel names with all template parameters unambiguously specified. The name mangling and demangling are handled under the hood so that users do not need to worry about it.

Kernel fusion#

cupy.fuse() is a decorator that fuses functions. This decorator can be used to define an elementwise or reduction kernel more easily than ElementwiseKernel or ReductionKernel.

By using this decorator, we can define the squared_diff kernel as follows:

>>> @cp.fuse()
... def squared_diff(x, y):
...     return (x - y) * (x - y)

The above kernel can be called on either scalars, NumPy arrays or CuPy arrays likes the original function.

>>> x_cp = cp.arange(10)
>>> y_cp = cp.arange(10)[::-1]
>>> squared_diff(x_cp, y_cp)
array([81, 49, 25,  9,  1,  1,  9, 25, 49, 81])
>>> x_np = np.arange(10)
>>> y_np = np.arange(10)[::-1]
>>> squared_diff(x_np, y_np)
array([81, 49, 25,  9,  1,  1,  9, 25, 49, 81])

At the first function call, the fused function analyzes the original function based on the abstracted information of arguments (e.g. their dtypes and ndims) and creates and caches an actual CUDA kernel. From the second function call with the same input types, the fused function calls the previously cached kernel, so it is highly recommended to reuse the same decorated functions instead of decorating local functions that are defined multiple times.

cupy.fuse() also supports simple reduction kernel.

>>> @cp.fuse()
... def sum_of_products(x, y):
...     return cp.sum(x * y, axis = -1)

You can specify the kernel name by using the kernel_name keyword argument as follows:

>>> @cp.fuse(kernel_name='squared_diff')
... def squared_diff(x, y):
...     return (x - y) * (x - y)


Currently, cupy.fuse() can fuse only simple elementwise and reduction operations. Most other routines (e.g. cupy.matmul(), cupy.reshape()) are not supported.

JIT kernel definition#

The cupyx.jit.rawkernel decorator can create raw CUDA kernels from Python functions.

In this section, a Python function wrapped with the decorator is called a target function.

A target function consists of elementary scalar operations, and users have to manage how to parallelize them. CuPy’s array operations which automatically parallelize operations (e.g., add(), sum()) are not supported. If a custom kernel based on such array functions is desired, please refer to the Kernel fusion section.

Basic Usage#

Here is a short example for how to write a cupyx.jit.rawkernel to copy the values from x to y using a grid-stride loop:

>>> from cupyx import jit
>>> @jit.rawkernel()
... def elementwise_copy(x, y, size):
...     tid = jit.blockIdx.x * jit.blockDim.x + jit.threadIdx.x
...     ntid = jit.gridDim.x * jit.blockDim.x
...     for i in range(tid, size, ntid):
...         y[i] = x[i]

>>> size = cupy.uint32(2 ** 22)
>>> x = cupy.random.normal(size=(size,), dtype=cupy.float32)
>>> y = cupy.empty((size,), dtype=cupy.float32)

>>> elementwise_copy((128,), (1024,), (x, y, size))  # RawKernel style
>>> assert (x == y).all()

>>> elementwise_copy[128, 1024](x, y, size)  #  Numba style
>>> assert (x == y).all()

Both styles to launch the kernel, as shown above, are supported. The first two entries are the grid and block sizes, respectively. grid ( RawKernel style (128,) or Numba style [128]) is the sizes of the grid, i.e., the numbers of blocks in each dimension; block ((1024,) or [1024]) is the dimensions of each thread block, please refer to cupyx.jit._interface._JitRawKernel for details. Launching a CUDA kernel on a GPU with pre-determined grid/block sizes requires basic understanding in the CUDA Programming Model.

The compilation will be deferred until the first function call. CuPy’s JIT compiler infers the types of arguments at the call time, and will cache the compiled kernels for speeding up any subsequent calls.

See Custom kernels for a full list of API.

Basic Design#

CuPy’s JIT compiler generates CUDA code via Python AST. We decided not to use Python bytecode to analyze the target function to avoid perforamance degradation. The CUDA source code generated from the Python bytecode will not effectively optimized by CUDA compiler, because for-loops and other control statements of the target function are fully transformed to jump instruction when converting the target function to bytecode.

Typing rule#

The types of local variables are inferred at the first assignment in the function. The first assignment must be done at the top-level of the function; in other words, it must not be in if/else bodies or for-loops.


JIT does not work inside Python’s interactive interpreter (REPL) as the compiler needs to get the source code of the target function.